Description
How To Apply a Magnetic Signs
Notes: Please make sure that the area on your vehicle where you wish the sign to be applied to is clean and dry, you may also want to consider a light wax before you apply your magnetic sign. The magnetic side of your sign must also be clean, dry and dust free.
1) Place one edge of your magnet on your vehicle in the desired position.
2) Allow the magnet to apply itself into the correct position feeding it from the original edge that’s already been applied.
If the sign is not straight or in the desired position, peel off the sign and reposition again, repeating the above process
Care and Maintenance Tips for your Magnetic Signs
Remove the sign on a regular basis, ideally every 2-3 days.
In hot weather we recommend it’s done daily.
In conditions of rain, sleet or snow, the sign must be removed and wiped dry to prevent damage to the sign or vehicle, wipe dry both the printed side of the sign, and also the magnetic side. This will prevent moisture from collecting which could cause damage to the surface of the vehicle.
You can clean the sign using warm soapy water, avoid any solvents, acetone, petrol or benzene
Remove any dirt before reapplying the sign.
Notes
It is not advised to apply a magnetic sign on to a newly painted surface (new cars, or newly repainted) please allow 3 months after painting to apply, and hand wax prior to application.
Magnetic Signs should not be applied to the front of a vehicle, due to the air turbulence being at its maximum.
Do not place signs over an engine compartment, due to the heat from the engine.
Avoid applying our magnetic signs to a body panel that contains any plastic filler, as this will reduce the magnets effectiveness
